Difference between revisions of "Eumig Mark S 807 D Projector"
(Another basic description) |
|||
| (9 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | [[Category:Projectors]][[Category:Eumig]] | + | [[Category:Projectors]][[Category:Eumig]][[Category:Super8]][[Category:Regular8]] |
| − | Eumig Mark S 807 Projector | + | Eumig Mark S 807 D Projector |
A dual gauge sound projector. | A dual gauge sound projector. | ||
| Line 8: | Line 8: | ||
May also be equipped with some other Eupronet zoom lens. | May also be equipped with some other Eupronet zoom lens. | ||
| − | Halogen lamp 12 V/ | + | Halogen lamp 12 V/75 W type EFP |
Sound: mono (record&playback), fade in / fade out, sound-on-sound, mixing from external source ( microphone 0,3-10 mV, 200 - 4000 Ω; line in 0,3mV - 2 V, 4,7 kΩ - 1 MΩ ) | Sound: mono (record&playback), fade in / fade out, sound-on-sound, mixing from external source ( microphone 0,3-10 mV, 200 - 4000 Ω; line in 0,3mV - 2 V, 4,7 kΩ - 1 MΩ ) | ||
| Line 26: | Line 26: | ||
Reel capacity: 180m/600ft | Reel capacity: 180m/600ft | ||
| − | Weight | + | Weight approx.: 7,5 kg |
| + | |||
| + | Original price in Austria (year unknown): ATS 5990,- | ||
Accessories: Universal reel; 8mm to super8 stepper for the front arm spindle; microphone; 6 m reel of magnetic striped film; film head trimmer/clipper. | Accessories: Universal reel; 8mm to super8 stepper for the front arm spindle; microphone; 6 m reel of magnetic striped film; film head trimmer/clipper. | ||
| − | Optional accessories: [[Eumig | + | Optional accessories: [[Eumig Serie 800 Daylight Viewer]]; Universal re-recording lead (a cord + four adapters). |
| + | |||
| + | [[Image:Eumig_807D_Seite_klein.jpg]] | ||
| + | |||
| + | [[Image:Eumig_807D_vorne_klein.jpg]] | ||
| Line 37: | Line 43: | ||
Changing between standard8 and S-type film formats requires changing the gate assembly and sprocket wheel set. If You are considering to buy this projector You should check that both sets are present. The second set of sprocket wheels is stored on the inner side of the removable front panel and the additional gate assembly is in a horizontal slot in the body, also under the front panel. When changing the gate assembly, the knob at the rear of the projector should be manually turned to position where the red dot is up. | Changing between standard8 and S-type film formats requires changing the gate assembly and sprocket wheel set. If You are considering to buy this projector You should check that both sets are present. The second set of sprocket wheels is stored on the inner side of the removable front panel and the additional gate assembly is in a horizontal slot in the body, also under the front panel. When changing the gate assembly, the knob at the rear of the projector should be manually turned to position where the red dot is up. | ||
| + | ==Reviews== | ||
==eBay== | ==eBay== | ||
<ebay>Eumig 807D</ebay> | <ebay>Eumig 807D</ebay> | ||
Latest revision as of 16:00, 7 June 2009
Eumig Mark S 807 D Projector
A dual gauge sound projector. Plays Super8/Single8 and standard8.
Lens: Vario Eupronet 1,3/15-30 mm. May also be equipped with some other Eupronet zoom lens.
Halogen lamp 12 V/75 W type EFP
Sound: mono (record&playback), fade in / fade out, sound-on-sound, mixing from external source ( microphone 0,3-10 mV, 200 - 4000 Ω; line in 0,3mV - 2 V, 4,7 kΩ - 1 MΩ )
Amplifier 3W, option for external amplifier ( line out 450 mV, 100 kΩ )
Internal loudspeaker
Option for external loudspeaker (4 - 8 Ω, 2 - 6 W)
Auto threading
Forward/backward projection
Speeds: 18 fps and 24 fps
Reel capacity: 180m/600ft
Weight approx.: 7,5 kg
Original price in Austria (year unknown): ATS 5990,-
Accessories: Universal reel; 8mm to super8 stepper for the front arm spindle; microphone; 6 m reel of magnetic striped film; film head trimmer/clipper.
Optional accessories: Eumig Serie 800 Daylight Viewer; Universal re-recording lead (a cord + four adapters).
Comments[edit]
Changing between standard8 and S-type film formats requires changing the gate assembly and sprocket wheel set. If You are considering to buy this projector You should check that both sets are present. The second set of sprocket wheels is stored on the inner side of the removable front panel and the additional gate assembly is in a horizontal slot in the body, also under the front panel. When changing the gate assembly, the knob at the rear of the projector should be manually turned to position where the red dot is up.
Reviews[edit]
eBay[edit]
