Talk:Super 8 EKTACHROME 64T motion picture film exposed in old cameras
I moved the Bauer S709XL/S715XL back to the "can't meter" section because the manual says they only sest 2 ASA ranges. If you have one of these cameras and can see that it has more than 2 notch-sensing buttons in the film chamber please move the camera to the "meter ok" section and explain it here. thank you 146.115.74.48 reed sturtevant
The cartridge-speed-setting-meter for the Beaulieu 1028 XL 60, 1018 SX 8 and 1008 XL consists of one or two spikes (depending on the model) that gets pressed into the chamber's wall as other meters. The main difference to the other meters is that this one "oscillates". This "oscillation" is shown in the side-view below: It ranges from the black position (=no cartridge inserted) to the hatched position (a "little bit" exaggerated - cartridge with highest ASA-rating inserted). The meter seems to measure the cartridge's speed by the degree of the oscillation. Hence it's most likely that these models really can handle a 64-ASA-nodge correctly (as stated in the manual):
(side view: lens will show to the right)
bonjour en consultant votre site,je cherchais à savoir si ma camera super 8(une eumig mini 3 servofocus ) etait corectement utilisable avec la pelicule ektachrome 64 T,ou si il fallait des reglages.ja ne l'ai trouvé cette camera dans aucune de vos listes pouvait vous m'aider? merci(repondre en français svp)merci
>>>>>
Je pense que cet Eumig seulement distingue entre 40 et 160 ASA (utiliser l'Super 8 Cartridge Notch Ruler si ca est correct!). Si cette camera a un "+/- correction for auto" vous pouvez corriger le photomètre. Mais si cette camera a seulement un "backlight control" (contre-jour-correctur?), je pense que vous ne pouvez pas utiliser l'ektachrome 64T. Une texte francais: Compatibilité Kodak T64
